Hem Twister

Standard Equipment

• Rect-Cap (H): 14″
• Rect-Cap (W): 20″
• Power: 5 hp
• Type (Auto, Manual, Semi): Auto
• Blade Width: 1.25″
• Blade Thickness: 0.042″
• Blade Length: 180″
• Dimensions: 72” x 55” x 65”
• Weight: 3,000
• SAW CAPACITY: 14″ HIGH X 20″ FLAT @ 90 DEGREES
  14″ HIGH X 20″ FLAT @ 90 DEGREES
  14″ HIGH X 15″ FLAT @ 45 DEGREES
  14″ HIGH X 10″ FLAT @ 60 DEGREES
  (MITER ONE DIRECTION ONLY)
  Degree OF CUT – LOCKING PIN IS RE-
  INSERTED IN HOLE AND ARM IS
  MANUALLY LOCKED IN PLACE. EACH
  HOLE IS SPACED 15 DEGREES APART.
  DEGREES ARE READ ON A PROTRACTOR.
• ARM LIFT: POWERED FROM CONTROL CONSOLE.
• WHEEL SIZE: 18″ DIAMETER WHEELS.
• BLADE SIZE: 1-1/4″ X 15’0″ X .042″ THICK
• BLADE DRIVE: 5 HP., 220/440V AC, 3 PHASE,1800 RPM, BALL BEARING TFC.
• BLADE SPEED: INFINITELY VARIABLE SPEED DRIVE 60-300 SFPM
• AIR REQUIREMENTS: 85 PSI, 3-5 CFM, EQUIPPED W/AIR FILTER/LUBRICATOR
• OPERATOR CONTROL: CONTROL CONSOLE IS LOCATED IN FRONT OF SAW FOR OPERATOR CON-
• VENIENCE. SAW MAY BE OPERATED IN MANUAL MODE. MOTOR WILL SHUT OFF
• AT THE END OF CUT AND THE ARM STAYS IN THE DOWN POSITION.
• MOTOR START INTERLOCK: CONTROL IS EQUIPPED WITH A SAFETY FEATURE OF MOTOR START INTERLOCK.
• CLAMPING VISE: MAIN CLAMPING VISE IS POWERED AND IS NON COCKING
• CUTTING PRESSURE: ADJUSTABLE CUTTING PRESSURE 0-800 LBS.
• D RATE: ADJUSTABLE 0-3 INCHES/SECOND
• CLAMPING PRESSURE: ADJUSTABLE 0-1,000 LBS.
• BLADE GUIDE SYSTEM: SIDE AND BACK GUIDES ARE FLAT CARBIDE INSERTS.
• COOLANT SYSTEM: MACHINE IS SET-UP FOR FLOOD STYLE COOLANT SYSTEM WITH 17 GALLON CAPACITY.
• SAFETY GUARDS: MACHINE IS EQUIPPED WITH BLADE GUARDS AND AWARENESS BARRIERS
• FOR SAFETY PURPOSES.
• LOAD TABLE: 24″ ROLLER LOAD TABLE IS PART OF MACHINE BASE AND IS FULLY COOLANT PANNED

Request A Quote

[contact-form-7 id=”49f8522″ title=”Product Form”]